A Guide For How To Install A Retractable Hose Reel

by Julian D.

A pressure washer is a device used for multiple cleaning tasks. It usually comes with a pressure washer hose. This is the part that connects the wand to the body of the overall pressure washer. Storing and maintaining a pressure washer hose can be quite challenging. For this reason, you would benefit from owning a pressure washer hose. The Giraffe pressure washer hose reel is one of the best choices on the market. You can read more about it on the official Giraffe website. Here, we look at the setting up of a retractable hose reel.

How to install a retractable hose reel

Below is a guide for how to install a retractable hose reel;

The first step is mounting the retractable hose reel. Here, you have two options. The first option is to mount the hose reel straight to studs, also known as joists. The second option is mounting a piece of two by ten on two studs. You can also mount them over rafters. Doing this helps distribute the pulling tension evenly on the hose. However, if you have mounts larger than two by ten, you will need a piece of plywood that can be mounted across walls or the ceiling board. The wall or ceiling boards have to be weight-bearing, or they won’t withstand the hose reel’s weight plus the hose.

After mounting the retractable hose reel, the next step is to attach the reel. The method of doing this differs from one brand and design to the next. For a conventional retractable hose reel, all you have to do is position the mounting bracket onto the plate. This should be easy because most mounting brackets come with adjustable arms. The role of the arms is to control the positioning of the reel. However, there are a few designs that are hard-mounted. This means that you cannot alter or adjust them. Once you have correctly done this, you can dangle the hose reel to the struts and secure it down. The fastening part is essential because it helps protect the reel from falling off its position when you tug or use the hose.

Connecting the hose to the reel

Once you have correctly installed the hose reel, the next step is attaching the hose to the reel. For this task, you will need some tools like assorted screwdrivers and wrenches. This can be done by screwing the female end to the reel’s connector. Some designs of hose reels may need you to use hose clamps and special brackets for this job. Like the installation process, connecting the hose to the hose reel differs from one brand or design to the next. It may also differ depending on the size of the hose in question. Once the hose is in place, you can use hose stops to prevent the hose from winding entirely on the reel. You will need a screwdriver. You must also ensure that the stops are inflexibly in place.

Final word

It is worth noting that spring-loaded retractable hose reels are a great choice because they are more eco-friendly than the latter. They also have fewer parts. This means that you do not have to worry about the hassle of assembling the parts or failures. Additionally, most retractable hose reels are usually wall-mount.

You may also like

Leave a Comment